Prism for Windows › Prism Help
The Develop module (Ctrl+2, or D in the Library) is where you develop a photo. Every change is a setting stored in the library and in the XMP sidecar: the original file is never modified, and each change is one step of undo (Ctrl+Z).
Its sections go from the decoding of the raw file to the final colour: DECODING, WHITE BALANCE, BASIC (profile, exposure, contrast, highlights, shadows, whites, blacks, clarity, dehaze, vibrance, saturation), TONE CURVE (RGB or Lab, with separate red, green and blue curves), COLOR MIXER, COLOR GRADING, DETAIL (sharpening, noise reduction), LENS (distortion and vignetting from the lens profile), EFFECTS (vignette, grain) and CALIBRATION. The eye of a section turns it off to compare, a section can be reset on its own, and every value can also be typed. Develop ▸ Auto Tone (Ctrl+U) and Develop ▸ Auto White Balance (Ctrl+Shift+U) give a starting point; Develop ▸ Reset goes back to the import settings.
The profile row in BASIC chooses how the raw colours are rendered: Prism comes with DCP camera profiles for many cameras and with its own looks. Develop ▸ Profile Lab… builds a look or a profile of your own from a photo and saves it next to the others.
R (Develop ▸ Crop & Straighten (R)) opens the crop: drag the corners, choose an aspect ratio in the Crop tab, straighten with the angle or the level tool, press Enter when done. The spot tool removes dust and distractions by healing, cloning or plain removal; [ and ] change its size, A shows the spots on a black-and-white map that makes dust easy to see.
+ Mask in the MASKS strip (Develop ▸ Masking (⇧W), Shift+W) adds a local adjustment: each mask gets its own Develop settings, applied over the global ones. O shows the mask as a red overlay; a mask can be inverted, hidden or reordered.
The AI masks and Depth Range run entirely on your PC, on the graphics card when it can. Their models are large, so they are not in the installer: the first time you use one, Prism tells you its size and licence and asks before downloading it with Download Model. Each model is downloaded once and kept in %LOCALAPPDATA%\Prism\Models. Subject, Background, People and Objects use different models from Prism for Mac, so their masks can differ slightly from the Mac's.
Photo ▸ Enhance… (Ctrl+Alt+I) removes the noise of a raw photo with an AI model and writes the result as a new DNG next to the original, named <name>-Enhanced-NR.dng, stacked with it. The window shows a preview and how long it will take on your PC. It works with the raw files of most cameras (Bayer sensors), not with X-Trans files. Its model is downloaded the first time, with your consent, like the AI masks; until it is on the PC, the command is greyed out and says why.
Ctrl+C and Ctrl+V on the photo copy and paste the whole development. Develop ▸ Copy Settings… lets you choose which sections to copy, Develop ▸ Paste Settings pastes them, and Develop ▸ Sync Settings… (Ctrl+Shift+S) applies the active photo's settings to all the selected ones. With Photo ▸ Develop Settings ▸ Auto Sync on, every change goes to all the selected photos at once. Develop ▸ Match Total Exposures evens out the exposure of a series.
.xmp and .lrtemplate develop presets). Presets are shared by every library on this PC..prismgrade) carries a whole development, masks included. Open one from File Explorer with Open in Prism to add it to your PowerGrades; apply it to new photos from the Import window, under Apply During Import.Italiano Deutsch Français Español Português (Brasil) 日本語 한국어 简体中文 繁體中文 Nederlands Русский