Prism for Windows › Prism Help

Tethered capture

With tethered capture the camera is connected to the PC and every photo you take arrives in the library a moment later, named, tagged and developed the way you set up, on the big screen.

Starting a session

  1. Open the library the photos should go into.
  2. Connect the camera with its USB cable and switch it on. Some cameras need a setting first (a USB or PC-connection mode): File ▸ Tethered Capture ▸ Camera Setup… tells you what to set.
  3. Choose File ▸ Tethered Capture ▸ Start Tethered Capture…. In Tethered Capture Settings choose the camera, name the session, choose where the files go, how they are named, and the metadata, keywords and develop settings each photo receives. You can also have the photos saved on the computer, on the camera's card or on both.
  4. Press OK. The capture window appears: it shows the camera, the last photo and the Capture button.

Shoot with the camera's shutter button or with Capture in the window. Each photo is downloaded and added to the library and, with File ▸ Tethered Capture ▸ Auto Advance Selection on, selected, so the newest photo is always the one you are looking at. File ▸ Tethered Capture ▸ New Shot (Ctrl+Shift+T) starts a new group of photos within the session; File ▸ Tethered Capture ▸ Show Tethered Capture Window (Ctrl+T) shows or hides the window; File ▸ Tethered Capture ▸ Stop Tethered Capture ends the session.

Which cameras

Prism talks to cameras in two ways, and Tethered Capture Settings shows which one a camera uses:

Prism 26.6 build 2 does not include libgphoto2 yet: until a later update brings it, cameras connect through Windows only, over USB, so network cameras, Live View and autofocus are not available.

Prism never installs a USB driver: it uses what Windows already has.

Cameras on the network

Cameras that offer PTP/IP over Wi-Fi or Ethernet can be used without a cable. The camera and the PC must be on the same network. Network Cameras (in the session settings) lists the cameras that announce themselves on the network; a camera that does not can be added by its address.

Live View and autofocus

File ▸ Tethered Capture ▸ Show Live View opens what the camera sees in a window of its own, live; hiding it stops the stream. File ▸ Tethered Capture ▸ Autofocus focuses before the next shot, and the session settings can autofocus before every capture or open Live View when the session starts.

Shooting with another program

If your camera works best with its maker's own tethering program, let that program save into a folder and have Prism watch it: in the session settings choose Watched Folder instead of a camera, or use File ▸ Auto Import ▸ Auto Import Settings… (see Auto Import).

Italiano Deutsch Français Español Português (Brasil) 日本語 한국어 简体中文 繁體中文 Nederlands Русский